In all cases the Slop Water is collected at a tank – or several tanks, and shipped onshore at a very high expense for the oil company. For decades there have been attempts to treat this water offshore at site, but as the chemical composition of the water changes from hour to hour no such applicable, successful method has . The system was devised primarily for the bilge water treatment technology developed by Genoil recently. Its aim is to treat slop oil . Shipping to shore also requires thorough cleaning of the vessel tanks after offloading, which compounds costs .
Whether it comprises contaminated drilling and completion fluids, cleaning residue from the rig pits, tanks, pipes and decking, or even collected rainwater, all slop typically must be shipped to shore for treatment and disposal, or else be re- injected . Conventional management of offshore drilling slop is costly and wasteful. Wärtsilä slop water treatment system is designed to clean water contaminated with oil or drilling mud produced by offshore operational activity. Pioneering solution of treating and removing oil-containing slop water, offshore and onshore – on installations, ships or even industrial facilities. Oreco offers efficient and innovative slop oil treatment to convert a wide range of slop oils into valuable products.
The primary goals for the company is to develop cleaning methods and equipment for waste water industry offshore and onshore. Most industries produce waste although recent trends have been to minimise such production or recycle such waste within the production process. However, many industries remain dependent on processes that produce slop.
Given the nature of the discharge limits offshore, a high percentage of the . Transportation of offshore slop for treatment poses both economic and environmental challenges to drilling operations. Recovered water can be discharged overboard in . Oily slops resulting from rig cleaning and contaminated rain water were typically sent to shore for processing as discharge is limited to ppm oil content, per OSPAR regulations. To mitigate the high cost of transporting waste water to the onshore treatment facility, an alternative was needed that would . Treating Challenging Oil Slop and Sludge Waste. As the responsibilities and regulations have become more complex, so too has the complexity of wastes being generated. Orbijet products are used around the world and have treated over 50tons of slop waste to date.
This stable waste made up out of oil, water, solids and a range of other (usually unknown) chemistries is hard to treat and difficult to handle. The called “ Slop Tank” product once collected by the authorized company, must be treated and recycle which is an environment benefit. In this process it must be drie cleaned from solid particles and conditioned to become a product with market value. For example as heavy residual fuel for cement industry, or ships.
To minimize considerably your environmental footprint. An ORS complete treatment unit is the economical solution for treating slop oils,tank sludge clean up and oil spill recovery. Analytical data on the effects of water contamination on oil-based mu the resultant slop -mud structure, the influence of shear, and quantification of the critical factors controlling phase-separation and chemical dose will be presented. In addition, treatment of the slop -mud on a continuous basis will be demonstrated both on .